|
|
|
|
|
|
|
3M VHB Tapes are high-strength bonding tapes and a proven alternative to screws, rivets, welds and other mechanical fasteners.
Unlike Screws or rivets – which join materials at a single point, high strength bonding tape permanently adheres one substrate to another while spreading the stress load across the entire length of the joint. Once the materials are joined with 3M VHB Tape a virtually indestructible “welds” is created.
3M VHB Tapes are fast, clean & simple to apply, distributes stress, invisible and eliminates unsightly mechanical fasteners, Damp vibration and reduces noise, allow the use of thinner, lighter weight materials, and prevent corrosion by separating dissimilar materials. |
- Distribute Stress
- Are invisible and eliminate unsightly Mechanical Fasteners
- Damp vibration and reduce noise
|
|
|
|
- Allow the use of thinner, lighter weight materials
- Prevent corrosion by separating dissimilar materials
- Are fast, clean and simple to apply
|
|
|
|
|
|
|
|
|
- No matter your choice of 3MTM Adhesive Sealants, you
get the same benefits:
- Bond lines that bend and ex to hold tight in vibration and
seal tight against corrosive elements.
- Resist yellowing, cracking, budding, chalking and UV
degradation for long term reliability indoors and out.
- Saves rework time and expense
|
|
- Resist bleeding and staining niches.
- Improved productivity, paintable polyurethanes when
skinned, paintable hybrids when wet.
- I select skin time and cure rate to meet your production
requirements. Select hardness, elongation, adhesion
strength and other end use characteristics for success
of your specific application.
|
|
|
|
|
|
|
|
Simply clean with a solution of
water and isopropyl alcohol and wipe dry. |
|
|
|
Sticks on contact exactly where
you roll it on. No drips and
oozing. No waiting. |
|
|
|
Roll down with a soft roller to
conform over contours, seam
edges, rivets, or screw heads. |
|
|
|
Peel off the protective release
liner. |
|
|
|
Burnish once more to optimize
adherence and conformance to
uneven surfaces |
|
|
|
|
|
|
|
With fast tack, long bonding range, and little or no
soak-in, 3M™ Super 77™ Multipurpose Spray
Adhesive is a versatile tool for bonding lightweight
materials that include fabrics, plastics, soft foams,
paper, cardboard, and thin gauge metals. |
|
|
|
3M™ Citrus Base Cleaner is our remarkable liquid cleaner/degreaser used to help dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It cleans without streaking and has a fresh citrus scent. You can use it in some cases to degrease substrates prior to adhesive bonding, in place of many chlorinated or petroleum based solvents and help increase bonding success. |
- Contains no chlorinated or petroleum based solvents.
- Cleans gently and leaves a pleasant citrus scent.
- Fresh citrus scent helps maintain a satisfactory work environment.
- Removes grease, oil, ink and most adhesives without harsh chemicals or hours of soaking.
- Can help prepare surfaces for adhesive bonding.
|
|
|
|
3M™ Hi-Strength 90 Spray Adhesive typically bonds edge banding in 60 seconds compared to 15-20 minutes for many typical bulk contact adhesives. Strength increases to an ultimate 230 psi in shear and 25 piw in peel. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|