|
|
|
| |
| |
|
| |
Alubond Qatar always cares about safety & health issues for all. So Alubond Qatar also added Building Protection Systems products namely Speed Humps, Wheel Stoppers, Corners Guards and Wall Guards which are mainly used in Car Parks, shopping centers, factories and insulations to control the movement and safety of pedestrians as well as these products protects buildings.
Proguard Impact Protection can be found in a variety of settings, from hospitals and colleges, to offices, and warehouses. Our heavy-duty bumpers and corner guards protect the toughest areas such as loading docks, storerooms and industrial areas.
Proguard Building Protection System is an ideal solution for the protection of Concrete Structures in building basement and other parking areas. |
Our Speed Humps gives you everything you need to slow cars to 15km/h. It’s perfect for resident areas, hotels, schools etc. It’s an excellent traffic safety device which is simple to install giving you immediate benefits. With the speed Hump kit you get all the essentials to install your Speed Hump, all you need is an electric drill. Speed Humps are available in different dimensions; the 50mm height ensures you can reduce traffic speed without unnecessary discomfort to drivers. 75mm Speed Hump kit for extreme safety where HGV's (Heavy Goods Vehicle) are present. 75mm Speed Bumps are the maximum height allowed for a speed ramp, giving a severe bump if you speed over them. The Speed Hump comes in alternative yellow and black sections giving you extra visibility making them easy to see. They won’t fade like asphalt speed bumps and can be driven over immediately once installed. Cats Eyes reflectors are also attached to each centre section, making them highly visible at night to ensure they are seen.
Installation of Speed Hump is simple and you should be able to install your Hump in less than a day, giving you a safer road almost immediately. It’s recommended that you leave a gap at both sides of the bump to allow drainage for rain water, stopping any build-up of water and debris. |
- You can also relocate the sections if needs be, or take them up during times of heavy Sand Storm or rain when motorists may not be able to see the speed ramp.
- Perfect for residential areas.
- Cats eyes reflectors.
- NB.: Our blue sections have Moulded yellow pigment - not just painted.
|
- Available Sizes Rubber Road Hump
|
| SIZE |
|
100 MM H X 600 MM width X1000 MM LONG |
| SIZE |
|
70 MM H X 400 MM width X 500 MM LONG |
| SIZE |
|
70 MM H X 400 MM width X250 MM LONG |
| SIZE |
|
50 MM H X 400 MM width X 500 MM LONG |
|
|
|
|
- Material: SBR, EPDM, Neoprene
- Color : Yellow & Black
|
| |
|
|
| |
Black / Yellow End Section for your Speed Hump. The rounded end caps provide a neat and protective finish to our 50mm premium speed Hump. They reduce trip hazards and stop drivers from driving through open end sections to avoid impact. They also reduce excessive wear and tear of vehicles.
The end cap is simple to install with 2 pre-drilled holes. It’s made from toughened rubber, capable of withstand heavy loaded Vehicles.
They’re great for industrial estates and loading bay areas, allowing heavy traffic to pass over them without constantly needing to replace them. |
| SIZE |
|
END CAP 50 MM H X 400 MM (W) X 250 MM LONG |
| SIZE |
|
END CAP 70 MM H X 400 MM (W) X 250 MM LONG |
|
|
|
|
|
| Pro-Guard® Wheel Stops are built to last, protecting cars and building from heavy impacts. Cars can park right up against the kerb without damaging it, and stops the car before it hits any property. Rubber parking curbs are a cost-efficient means of ensuring that cars and other wheeled equipment stays in the respective spaces you have assigned to them by preventing any forward or backward movement. This also means that the surrounding buildings, fencing, structures and objects are protected as the vehicle will not run into them and cause costly damage. Pro-Guard® Wheel Stops Traffic and Safety Equipment supplies wheel stopper with yellow strips for increased visibility – providing further protection for the vehicle by making users of the environment aware of its existence. Apart from being superb impact protection, they also act as useful space dividers and are a great solution for car parks or industrial vehicle storage spaces. |
- High quality rubber parking kerb won’t chip, crack, split or rot like concrete kerbing.
- Simple to install with 4 fixings in concrete or tarmac.
- Won’t damage cars if they drive up against them thanks to the flexible design.
- If you need to move the rubber parking block for re-planning or any other issues, you can lift the kerb and place it elsewhere.
|
The rubber wheel stop is perfect for any car park, giving you long term benefits and an easy way to outline parking spaces.
Dimensions |
| SIZE |
|
137 MM BW X 75 MM UW X 75 MM H X 1800 MM LONG |
| SIZE |
|
150 MM BW X 75 MM UW X 100 MM H X 1800 MM LONG |
| SIZE |
|
137.5 MM BW X 75 MM UW X 100 MM H X 2000 MM LONG |
| SIZE |
|
150 MM BW X 86 MM UW X 150 MM H X 1800 MM LONG |
|
|
|
|
|
Color: Black with Yellow strips |
|
|
|
| |
| Pro-Guard® line of corner guards leads the industry in its breadth of application, with suitable options when you need maximum impact protection in your parking, commercial, or industrial environment. Pro-Guard® Heavy-Duty Corner Guards Protect columns in a retail environment, corners in your parking garage or storage facility. Whether it’s loading docks, warehouses or in-plant offices that need protection, our Heavy-Duty Corner Guards will complete your design in a variety of wing sizes and colors. Corner Protection Guard, ideal for placing on pillar or wall corners to protect both the infrastructure and vehicles from damage. |
- Can be installed directly to the wall or pillar quite easily.
- Yellow strips alert nearby drivers to their presence.
- Reduces the risk of damage to both vehicles and the infrastructure if impact occurs.
- Comes with installation bolts allowing you to bolt them to the desired surface quickly and easily without any fuss, also allowing the customer to install them as soon as they get them.
|
Dimensions |
| SIZE |
|
100 MM X 100 MM X 1 METER LONG-1.2MM GI CLIP |
| SIZE |
|
120 MM X 120 MM X 1 METER LONG-1.2MM GI CLIP |
| SIZE |
|
100 MM X 100 MM X 1 METER LONG-1.2MM GI CLIP |
| SIZE |
|
75 MM X 75 MM X 1 METER LONG-1.2MM GI CLIP |
|
|
|
|
|
| SIZE |
|
100 MM X 100 MM X 1 METER LONG |
| SIZE |
|
75 MM X 75 MM X 1 METER LONG |
|
|
|
|
|
| SIZE |
|
100 MM X 100 MM X 1 METER LONG |
| SIZE |
|
100 MM X 100 MM X 1 METER LONG |
| SIZE |
|
73 MM X 73 MM X 1 METER LONG |
|
|
|
|
|
|
|
|
|
|
| |
Pro-Guard® wall guards run the gamut of sizes, shapes, colors and styles. In addition to our unique ability to protect all areas of any facility. We offer outstanding protection from all types of abuse, thus dramatically reducing maintenance and repair expenses. They are designed to protect the structures from impact of trolleys and general Traffic. Materials are available in natural Rubber, SBR, EPDM and Neoprene on request.
Dimensions
|
| SIZE |
|
200 MM X 25 MM THICK |
| SIZE |
|
200 MM X 35 MM THICK |
| SIZE |
|
200 MM X 50 MM THICK |
|
|
|
|
|
|
|
|
|
|
 |
| |
|
| |
|
| |
|
|
|
|
|
